Operation Manual

Adjusting the camera settings using the menus
User Manual
16
Setting the resolution
Use this menu item to select the resolution of the image as follows:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Capture menu.
4. Move the 5-way button up or down to
highlight the Resolution submenu.
5. Move the 5-way button right to open
the Resolution submenu
6. Move the 5-way button up or down to
select from the scene options:
– 12.0M
– 10.0M
–5.0M
–3.1M
–1.3M
–VGA
7. Press OK when finished.
Setting the date stamp
The date stamp menu enables you to imprint the time and the
date on the image. To set the date stamp, do the following:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Capture menu.
4. Move the 5-way button up or down to
highlight the Date stamp submenu.
5. Move the 5-way button right to open
the Date stamp menu.