Operation Manual

Adjusting the camera settings using the menus

User Manual

Exposure Settings

By using the Exposure Adjusting menu, you can set the quantity

of light entering into the camera when you take picture. The EV

compensation is expressed as a single number that is used by

the digital camera to calculate the correct combination of aper-

ture and shutter speed for producing optimum quality pictures.

Setting a higher EV compensation value will over-expose a shot

while setting a lower value will under-expose a shot. Exposure

can be adjusted from –2.0 to +2.0. The value is shown on the LCD

display. To change the EV compensation value, do the following:

1. Turn on the camera and switch to picture mode.

2. Press Menu.

3. Move the 5-way button left or right to

navigate to the Capture menu.

4. Move the 5-way button up or down to

highlight the EV adjust submenu.

5. Move the 5-way button right to open

the EV adjust submenu.

6. Move the 5-way button up or down to

adjust the EV value between -2.0

through +2.0. Select Normal for the

default value.

7. Press OK when finished.