Operation Manual

Chapter 3 Taking still images or videos
27
Customizing the camera
Restoring defaults
Use the setup menu to restore the camera settings to their default
values as follows:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Setup menu.
4. Move the 5-way button up or down to
highlight the Default submenu.
5. Move the 5-way button right to open
the Default submenu.
6. Move the 5-way button up or down to
select Confirm to reset the camera or
Cancel to cancel the operation.
7. Press OK when finished.
Memory Formatting
Format the camera’s memory by the following steps:
1. Turn on the camera and switch to picture mode.
2. Press Menu.
3. Move the 5-way button left or right to
navigate to the Setup menu.
4. Move the 5-way button up or down to
highlight the Format submenu.
5. Move the 5-way button right to open
the Format submenu.
6. Press the 5-way button’s UP or DOWN
buttons to select OK in order to for-
mat the memory, or select Cancel to
cancel the operation.
7. Press OK when finished. The memory
of the camera is formatted. All files,
including protected files, are deleted.
Warning: Memory formatting will delete all files stored in the memory. Make
sure you have backed up any files you still want.