Data Sheet

ManualsBrandsEaton ManualsCircuit BreakersP3-63/EA/SVB-SW/HI11 MR switch for front mounting, lockable 690 V Black 1 pc(s)

DATASHEET - P3-63/EA/SVB-SW/HI11

Main switch, P3, 63 A, ﬂush mounting, 3 pole, 1 N/O, 1 N/C, STOP function,

With black rotary handle and locking ring, Lockable in the 0 (Oﬀ) position

Part no. P3-63/EA/SVB-SW/HI11

Catalog No. 022264



Delivery program

Product range   Main switch

maintenance switch

Repair switch

Part group reference   P3

Stop Function   STOP function

   With black rotary handle and locking ring

Information about equipment supplied   Auxiliary contact or neutral conductor ﬁtted by user.

Number of poles   3 pole

Auxiliary contacts

  

  N/O 1

  N/C 1

Locking facility   Lockable in the 0 (Oﬀ) position

Degree of Protection   Front IP65

Design   ﬂush mounting

  

Contact sequence  

Function  

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 30

Rated uninterrupted current I

A 63

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Technical data

General

Standards   IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL

Switch-disconnector according to IEC/EN 60947-3

NEMA12

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

Enclosed  °C -25 - +40

Overvoltage category/pollution degree   III/3

06/18/2021 Eaton 022264 ED2021 V80.0 EN 1 / 6

Summary of content (6 pages)

PAGE 1
DATASHEET - P3-63/EA/SVB-SW/HI11 Main switch, P3, 63 A, ﬂush mounting, 3 pole, 1 N/O, 1 N/C, STOP function, With black rotary handle and locking ring, Lockable in the 0 (Oﬀ) position Part no. Catalog No. P3-63/EA/SVB-SW/HI11 022264 Delivery program Product range Main switch maintenance switch Repair switch Part group reference P3 Stop Function STOP function With black rotary handle and locking ring Information about equipment supplied Auxiliary contact or neutral conductor ﬁtted by user.
PAGE 2
Rated impulse withstand voltage Uimp Mechanical shock resistance V AC 6000 g 15 Mounting position As required Contacts Mechanical variables Number of poles 3 pole Auxiliary contacts N/O 1 N/C 1 Electrical characteristics Rated operational voltage Ue V AC 690 Rated uninterrupted current Iu A 63 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
230 V Ie A 63 400 V 415 V Ie A 63 500 V Ie A 63 690 V Ie A 63 Ie A 63 V 60 A 50 DC DC-1, Load-break switches L/R = 1 ms Rated operational current Voltage per contact pair in series DC-23A, motor load switch L/R = 15 ms 24 V Rated operational current Ie Contacts Quantity 1 48 V Rated operational current Ie Contacts A 50 Quantity 2 60 V Rated operational current Ie Contacts A 50 Quantity 2 120 V Rated operational current Ie Contacts Control circuit reliability at 24 V
PAGE 4
Solid or ﬂexible conductor with ferrule AWG Terminal screw 14 - 2 M5 Tightening torque lb-in 26.5 Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 63 Heat dissipation per pole, current-dependent Pvid W 4.5 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min.
PAGE 5
Rated permanent current at AC-21, 400 V A 63 Rated operation power at AC-3, 400 V kW 30 Rated short-time withstand current lcw kA 1.
PAGE 6
≦ 3 padlocks 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 022264 ED2021 V80.