Data Sheet

ManualsBrandsEATON ManualsCircuit BreakersLimit switch 10 A 1 x 90 ° Grey, Black TM-1-8291/EZ 1 pc(s)

DATASHEET - TM-1-8291/EZ

ON-OFF switches, TM, 10 A, centre mounting, 1 contact unit(s), Contacts:

2, 90 °, maintained, With 0 (Oﬀ) position, 0-1, design no. 8291

Part no. TM-1-8291/EZ

Catalog No. 015073



EL-Nummer

(Norway)

0001456156

Similar to illustration

Delivery program

Product range   Control switches

Part group reference   TM

Basic function   ON-OFF switches

   with black thumb grip and front plate

Contacts   2

Degree of Protection   Front IP65

Design   centre mounting

  

Contact sequence  

Switching angle  ° 90

Switching performance   maintained

With 0 (Oﬀ) position

Design number   8291

Front plate no.  

front plate   0-1

Motor rating AC-23A, 50 - 60 Hz

  

400 V P kW 3

Rated uninterrupted current I

A 10

Note on rated uninterrupted current !

  Rated uninterrupted current I

is speciﬁed for max. cross-section.

Number of contact units  contact

unit(s)

Technical data

General

Standards   IEC/EN 60947, VDE 0660, CSA, UL

Control switch as per IEC/EN 60947-5-1

Auxiliary switch as per IEC/EN 60947-5-1

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +50

06/18/2021 Eaton 015073 ED2021 V80.0 EN 1 / 5

Summary of content (5 pages)

PAGE 1
DATASHEET - TM-1-8291/EZ ON-OFF switches, TM, 10 A, centre mounting, 1 contact unit(s), Contacts: 2, 90 °, maintained, With 0 (Oﬀ) position, 0-1, design no. 8291 Similar to illustration Part no. Catalog No.
PAGE 2
Overvoltage category/pollution degree Rated impulse withstand voltage III/3 Uimp V AC Mounting position 4000 As required Contacts Electrical characteristics Rated operational voltage Ue V AC 500 Rated uninterrupted current Iu A 10 Note on rated uninterrupted current !u Rated uninterrupted current Iu is speciﬁed for max. cross-section.
PAGE 3
Design veriﬁcation as per IEC/EN 61439 Technical data for design veriﬁcation Rated operational current for speciﬁed heat dissipation In A 10 Heat dissipation per pole, current-dependent Pvid W 0.15 Equipment heat dissipation, current-dependent Pvid W 0 Static heat dissipation, non-current-dependent Pvs W 0 Heat dissipation capacity Pdiss W 0 Operating ambient temperature min. °C -25 Operating ambient temperature max. °C 50 IEC/EN 61439 design veriﬁcation 10.
PAGE 4
Switching power at 400 V kW 0 Conditioned rated short-circuit current Iq kA 0 Number of poles 2 Number of auxiliary contacts as normally closed contact 0 Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as change-over contact 0 Motor drive optional No Motor drive integrated No Voltage release optional No Device construction Built-in device ﬁxed built-in technique Suitable for ground mounting No Suitable for front mounting 4-hole No Suitable for f
PAGE 5
Key operation lock mechanism Door drilling dimensions Drilling dimensions: either 16.2 mm = without reduction ≙ RMQ16 or 22.3 mm = with reduction ≙ RMQ Titan 06/18/2021 Eaton Industries GmbH http://www.eaton.eu © 06/2021 by Eaton Industries GmbH Eaton 015073 ED2021 V80.