Data Sheet

10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Circuit breakers and fuses (EG000020) / Earth leakage circuit breaker (EC000905)
Electric engineering, automation, process control engineering / Electrical installation, device / Residual current protection system / MCB/RCCB combination (ecl@ss10.0.1-27-14-22-07
[AFZ810015])
Number of poles (total)   4
Number of protected poles   4
Rated voltage  V 415
Rated insulation voltage Ui  V 500
Rated impulse withstand voltage Uimp  kV 4
Rated current  A 16
Rated fault current  A 0.03
Leakage current type   A
Current limiting class   3
Rated short-circuit breaking capacity acc. EN 61009  kA 6
Rated short-circuit breaking capacity IEC 60947-2  kA 6
Rated short-circuit breaking capacity Icn acc. EN 61009-1  kA 6
Disconnection characteristic   
Surge current capacity  kA 0.25
Voltage type   AC
Frequency   50 Hz
Release characteristic   B
Concurrently switching N-neutral   Yes
With interlocking device   No
Over voltage category   3
Pollution degree   2
Ambient temperature during operating  °C -25 - 40
Width in number of modular spacings   4
Built-in depth  mm 75.5
Suitable for flush-mounted installation   No
Anti-nuisance tripping version   No
Degree of protection (IP)   IP20
Connectable conductor cross section solid-core  mm² 1 - 25
Connectable conductor cross section multi-wired  mm² 1 - 25
06/16/2021 Eaton 170988 ED2021 V80.0 EN 2 / 3