Data Sheet

10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Is the panel builder's responsibility.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.
10.8 Connections for external conductors   Is the panel builder's responsibility.
10.9 Insulation properties   
10.9.2 Power-frequency electric strength   U
i
= 800 V AC
10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.
10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.
10.11 Short-circuit rating   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The specifications for the switchgear must be
observed.
10.13 Mechanical function   The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Fuse switch disconnector (EC001040)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Off-load switch, circuit breaker, control switch / Fuse switch disconnector
(ecl@ss10.0.1-27-37-14-01 [AKF058013])
Version as main switch   No
Version as safety switch   No
Max. rated operation voltage Ue AC  V 690
Rated permanent current Iu  A 160
Rated operation power at AC-23, 400 V  kW 0
Conditioned rated short-circuit current Iq  kA 120
Rated short-time withstand current lcw  kA 7
Suitable for fuses   NH00
Number of poles   3
With error protection   No
Type of electrical connection of main circuit   Frame clamp
Cable entry   Other
Equipped with connectors   No
Suitable for ground mounting   No
Suitable for front mounting 4-hole   No
Suitable for busbar mounting   Yes
Type of control element   Cover grip
Position control element   Front side
Motor drive optional   No
Motor drive integrated   No
Version as emergency stop installation   No
Degree of protection (IP), front side   Other
06/18/2021 Eaton 183034 ED2021 V80.0 EN 3 / 4