Instruction manual

Instruction Booklet IB 70-8698

Instruction Manual for the Eaton RTC-100

Automatic Transfer Switch Controller

Eaton Corporation

Electrical Group

1000 Cherrington Parkway

Moon Township, PA 15108

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. IB 70-8698 / TBG000263

December 2009

PowerChain Management is a registered

trademark of Eaton Corporation.

All other trademarks are property of their

respective owners.

This instruction booklet is published solely for information purposes

and should not be considered all-inclusive. If further information is

required, you should consult Eaton.

Sale of product shown in this literature is subject to terms and con-

ditions outlined in appropriate Eaton selling policies or other contrac-

tual agreement between the parties. This literature is not intended

to and does not enlarge or add to any such contract. The sole

source governing the rights and remedies of any purchaser of this

equipment is the contract between the purchaser and Eaton.

NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY, OR WARRANTIES ARISING FROM COURSE

OF DEALING OR USAGE OF TRADE, ARE MADE REGARDING

THE INFORMATION, RECOMMENDATIONS AND DESCRIPTIONS

CONTAINED HEREIN. In no event will Eaton be responsible to the

purchaser or user in contract, in tort (including negligence), strict

liability or otherwise for any special, indirect, incidental or conse-

quential damage or loss whatsoever, including but not limited to

damage or loss of use of equipment, plant or power system, cost

of capital, loss of power, additional expenses in the use of existing

power facilities, or claims against the purchaser or user by its cus-

tomers resulting from the use of the information, recommendations

and description contained herein.