Product Manual

5
PLEASE NOTE: 20H IS FOR OUTDOOR PERMANENT INSTALLATIONS ONLY AND 20HI IS FOR INDOOR PERMANENT INSTALLATIONS ONLY. THIS MANUAL
AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.ECCOTEMP.COM/SUPPORT FOR MORE INFORMATION.
Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: [phone] | Email: [e-mail] | Address: 315 - A Industrial RD Summerville, SC 29483
English
DANGER!
NATURAL GAS AND LIQUEFIED PETROLEUM MODELS
Both LP and natural gas have an odorant added to aid in detecting a gas leak. Some people
may not physically be able to smell or recognize this odorant. If you are unsure or unfamiliar
with the smell of LP or natural gas, ask the gas supplier. Other conditions, such as “odorant
fade”, which causes the odorant to diminish in intensity, can also hide or camouage a gas
leak. Always check with commercial leak detector or soapy water.
• Gas detectors are recommended in LP and natural gas applications and
their installation should be in accordance with the detector manufacturer’s
recommendations and/or local laws, rules, regulations or customs.
• Water heaters utilizing LP gas are dierent from natural gas models. A natural gas
water heater will not function safely on LP gas and vice versa.
• No attempt should ever be made to convert the water heater from natural gas to LP
gas. To avoid possible equipment damage, personal injury or re, do not connect the
water heater to a fuel type not in accordance with the unit data plate; propane for
propane units and natural gas for natural gas units. These units are not certied for any
other fuel type.
• LP water heaters should not be installed· below grade (for example, in a basement) if
such installation is prohibited by federal, state and/or local laws, rules, regulations or
customs.
• Propane or LP gas must be used with great caution. It is heavier than air and will collect
rst in lower areas making it hard to detect at nose level.
• Before attempting to light the water heater, make sure to look and smell for gas leaks.
Use a soapy solution to check all gas ttings and connections. Bubbling at a connection
indicates a leak that must be corrected. When smelling to detect a gas leak, be sure to
sni near the oor also.
• It is recommended that more than one method, such as soapy solution, gasdetectors,
etc., be used to detect leaks in gas applications.
Notice: If a gas leak is present or suspected:
• DO NOT attempt to nd the cause yourself.
• DO NOT try to light any appliances.
• DO NOT touch any electrical switch.
• DO NOT use any phone in your building.
• Leave the house immediately and make sure your family and pets leave
also.
• Leave the doors open for ventilation and contact the gas supplier, a
qualied service agency or the re department.
• Stay away from the house (or building) until the service call has been
made, the leak is corrected and a qualied agency has determined the
area to be safe.
Safety
English-20Liter-Series-ManualV4_OK.indd 5 3/12/2019 10:54:59 PM