Full Product Manual

14
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
15
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: [phone] | Email: [e-mail] Address: 315 - A Industrial RD Summerville, SC 29483 Phone: [phone] | Email: [e-mail] Address: 315 - A Industrial RD Summerville, SC 29483
RESETTING THE HIGH LIMIT SWITCH:
The high limit safety shut off switch will shut the water heater down when water
temperatures exceed 185 F. Power is automatically turned off to the heating
element. The shut off device may activate as a result of a power outage or an
electrical storm.
NOTE: Do not attempt to reset the high limit switch without rst allowing the
water heater to cool down the high temperature water inside the heater.
WARNING: Do not tamper with the reset button to override overheating shut
down.
1. Unplug the water heater from the electric outlet.
2. Drain and remove the water heater. (see page 12)
3. Remove the front panel of water heater and locate the high limit reset button.
4. Depress the small red button in the center of the junction box, replace the
bottom panel and place the water heater back into service.
NOTE: A lower temperature setting saves energy and reduces the risk of scalding.
CAUTION!: Call a technician if the high limit needs to be reset frequently.