Product Manual

6
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483
GENERAL INFORMATION
The Seisco Mini-Tank Water Heaters can be used in most under the counter, point
of use applications. EM models are designed to supply hot water for all hand
wash and kitchen sinks in a residential,
commercial or industrial environment.
EM models can replace traditional central hot water heaters thereby conserving
water and reducing energy waste. EM models can also be plumbed in series with
the central water heater and act as a booster.
The Seisco Mini-Tank Water Heaters are lightweight and compact and
manufactured for easy installation. EM models can be mounted on the wall with
included hardware, or freestanding.
EM models are designed to operate at 150-psi maximum water pressure. Install a
pressure-reducing valve if your water pressure is greater than 150-psi.
CAUTION!: The manufacturer cannot be responsible for the damage caused by
improper installation or by failure to follow instructions in this manual. Comply
with the Installation Instructions before connecting to
electrical outlet.
CAUTION!: The thermostat has been pre-set at the factory between 105m ( 41 C)
and 113m ( 45 C).
CAUTION!: Hydrogen gas can be produced in a hot water system served by this
heater that has not been used for a long period of time (generally 2 weeks or
more). Hydrogen gas is extremely flammable. To
reduce the risk of injury under these conditions, it is recommended that the hot
water faucet be opened for several minutes at the nearest and most distant sink
being served by this water heater before using any
electrical appliance connected to the hot water system {i.e. Dishwasher). If
hydrogen gas is present, there will probably be an unusual sound such as air
escaping through the faucet as the water begins to flow. There
should be no smoking or open flame near the faucet at this time.
WARNING: Installer should review the contents of this manual with
the owner upon completion of the installation, and the manual should
remain with the owner and placed in a location close to the water
heater.