Product Manual

Phone: [phone] | Email: [e-mail] | Address: 315 - A Industrial RD Summerville, SC 29483
PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK
AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS.
7
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.com/locater
INSTALLATION LOCATION & METHOD
Fixed installation on the wall
Locate an appropriate place on a section of wall that meets all safety and installation requirements
Fig 1 Front and back of the appliance
Fig 2 Remove screw which xed the bracket on back of the appliance.
Fig 3
Hold the back bracket hanger in position against the wall in the desired hanging location. Check to
make sure that the bracket is level. Mark the wall where the mounting holes should be located. Drill holes of 1/4”
diameter in the marked locations. If you are on a stud, screw the bracket directly into the wall. If you are not on a
stud, insert the plastic anchor in the hole, and secure the bracket using the screwing supplied.
1.2 in.
17.8 in.
2.5 in.
1.2 in.
2.5 in.