Full Product Manual

Phone: [phone] | Email: [e-mail] | Address: 315 - A Industrial RD Summerville, SC 29483
8
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.com/locater
PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK
AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS.
INSTALLATION LOCATION & METHOD CONTINUED...
Fig 4 Remove (4) screws and washers from the unit to free the front cover. Carefully lift the front cover
off the unit a few inches. Disengage the ribbon cable connecting the front cover LCD panel to the main control
board of the unit. Remove cover completely.
Please note: If LCD connection cable cannot be disengages, simply set the front cover aside and keep the cable
connected.
Fig 5 Attach unit to mounting bracket by sliding onto tabs. Make sure the unit is properly secured to both
tabs of the bracket. Install bottom, center screw to afx the unit to the bracket to complete mounting.