Full Product Manual

Phone: [phone] | Email: [e-mail] | Address: 315 - A Industrial RD Summerville, SC 29483
2
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locater: Eccotemp.com/locater
PLEASE NOTE: THIS MANUAL IS SUBJECT TO CHANGE AT ANYTIME, TO ENSURE THIS MANUAL IS UP TO DATE PLEASE VISIT OUR HELP DESK
AT WWW.ECCOTEMP.COM FOR ALL OF OUR PRODUCT MANUALS.
PRODUCT FEATURES
The Eccotemp iE Electric tankless water heaters include patented technology with multi-safety devices, including
the following features:
1. Tankless, instantaneous heating for on demand hot water, No pre-heating. No stand-by heating loss. Energy-
saving.
2. Micro-computer control, adopting patented heating technology. Water is completely separated from
electricity by multi-layers of composite nano insulation material.
3. Over-heating thermal cut-off to avoid scalds. Once outlet water temperature reaches 153(degree symbol)
F/67(degree symbol)C, the electricity is automatically cut off. If this occurs, the screen will beep and display
an E1 error code.
4. Malfunction sensor. If there is a malfunction wit the temperature sensor, the heater will stop working and
display an E3 error code.
5. Dry-heating thermal cut-off. In case of dry heating, the unit’s electricity will be cut off and it will display an E4
error code.
6. Eccotemp Product Advantage: Eccotemp iE heating elements are made from a single piece of cast aluminum;
so there will never be water leakage, non electric leakage in the heating chamber.
RECOMMENDED USES
iE-11 - Rated at 1.8 GPM @ 40 degree temperature rise
1 to 2 single applications such as single shower, sink, washer, dishwasher located in warmer climates averaging incoming water
temperatures above 65 degrees F.
Not recommended: multiple applications; colder climates averaging water temperatures 50 degrees F or lower.
iE-15B - Rated at 1.8 GPM @ 40 degree temperature rise
Single, stand alone point of use application such as a sink, washer, single shower located in warmer climates averaging
incoming water temperatures above 65 degrees F.
Not recommended: multiple applications; colder climates averaging water temperatures 50 degrees F or lower.
iE-15A - Rated at 2 GPM @ 40 degree temperature rise
Single point of use application such as stand alone sink, washer, single shower located in warmer climates averaging incoming
water temperatures above 65 degrees F.
Not recommended: multiple applications; colder climates averaging water temperatures 50 degrees F or lower.
iE-18 - Rated at 2.5 GPM @ 40 degree temperature rise
1 to 2 single applications such as single shower, sink, washer, dishwasher
Not recommended: cold climates averaging water temperatures 50 degrees F or lower; not intended for use on more than 2
applications at once.
iE-24 - Rated at 3 GPM @ 40 degree temperature rise
Small cabin, apartment, ofce, or any other small dwelling with 2 applications or less.
Not Recommended: whole home installation or multi family dwelling; not intended for use on more than 2 applications at
once.
iE-27 - Rated at 3.5 GPM @ 40 degree temperature rise.
Medium to small 3 bedroom, 2 bath homes (ideally under 2500 square feet); any other dwelling with 3 applications or less.
Not Recommended: large homes or any other large dwelling; not intended for use on more than 3 applications at once.