User's Manual

Street Light Bridge Integrator’s Guide 107
Figure 12. Weekday Schedule
Creating the Weekday Daily Schedule
The weekday daily schedule turns on the lights at the start of the evening rush
hour, dims them at the end of the evening rush hour, brightens them at the
beginning of the morning rush hour, and dims them at the end of the morning
rush hour. To create the weekday daily schedule, perform the following steps:
1. In the Scheduler: Configure Web page, click the Daily Schedules icon.
The Scheduler: Daily Schedules Web page opens.
2. Click a Time box that is under any of the columns for Monday through
Friday. The Edit dialog opens.
3. Create each of the following events:
• At the beginning of the morning rush hour (for example, 05:00), an
ON_100 event with a priority of 255. This event fully illuminates the
lights to 100% if sunrise has not yet occurred. If sunrise has occurred
already, this event does not execute because the exception schedule
has turned off the lights at sunrise using a higher priority event,
which locks out this lower priority event.
• At the end of the morning rush hour (for example, 09:00), an ON_60
event with a priority of 255. This event dims the lights to 60% if
sunrise has not yet occurred. If sunrise has occurred already, this
event does not execute because the exception schedule has turned off
the lights at sunrise using a higher priority event, which locks out
this lower priority event.
• At the beginning of the evening rush hour (for example, 17:00), an
ON_100 event. This event turns the lights on and fully illuminates
them to 100% once sundown occurs, if the evening rush hour is
ongoing.
o If the start of the evening rush hour occurs before sundown, the
ON_100 event is not executed until sundown, because the