User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
Street Light Bridge Integrator’s Guide 111
which becomes read-only, and an Offset box is added to the right
of the Time box. If the event is to occur sometime before or after
sundown, enter that period of time in the Offset box. For
example, if you want an ON_100 event to occur 30 minutes after
sundown, enter 00:30.
d. In the Value box, select OFF. If OFF does not appear as an
option in the list, you can enter OFF and then create an OFF
preset as described in
Selecting Data Points
on page 88.
e. In the Priority box, enter a priority that is lower than the 255
priority used for the weekday daily schedule (this example uses a
priority of 220). This priority essentially locks out the events in
the weekday daily schedule, which have lower priorities (255).
7. Click OK to save your sunrise/sundown events and return to the
Scheduler: Exception Schedules Web page.
8. The range of dates on which the exception is to occur is highlighted teal
(or dark blue) in the calendar on the Scheduler: Exception Schedules Web
page.
9. Click Submit.