User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
118 Controlling a Street Lighting Network
c. Select the Show Sunrise/Sunset Functions check box. A Function
box appears to the right of the Time box.
d. In the Function box, select the Sunrise icon (
). The calculated
sunrise time appears in the Time box, which becomes read-only,
and an Offset box is added to the right of the Time box. If the
event is to occur sometime before or after sunrise, enter that
period of time in the Offset box. For example, if you want a
DIMMING event to occur 15 minutes before sunrise, enter -00:15
e. In the Value box, select OFF. If OFF does not appear as an
option in the list, you can enter OFF and then create an OFF
preset as described in
Selecting Data Points
on page 88.
f. In the Priority box, enter a priority that is lower than the 255
priority used for the weekend daily schedule (this example uses a
priority of 210). This priority essentially locks out the events in
the weekday daily schedule, which have lower priorities (255).
g. Create a new event: Right-click anywhere in the row of the
current event and click Add on the shortcut menu. A new row is
added to the dialog.