User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
Street Light Bridge Integrator’s Guide 119
h. In the Function box, select the Sundown icon (
). The calculated
sundown time appears in the Time box, which becomes read-only,
and an Offset box is added to the right of the Time box. If the
event is to occur sometime before or after sundown, enter that
period of time in the Offset box. For example, if you want an
ON_60 event to occur 30 minutes after sundown, enter 00:30.
i. In the Value box, select ON_60. If ON_60 does not appear as an
option in the list, you can enter ON_60 and then create an ON_60
preset as described in
Selecting Data Points
on page 88.
j. Click OK to save your events and return to the Edit: <
exception
date
> dialog.
8. The Edit: <
exception date
> dialog is updated to reflect the events that
you created. Observe that the schedule for the selected weekend day
shows the OFF that is scheduled at sunrise, and the ON_60 event that is
scheduled at sundown.