User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
Street Light Bridge Integrator’s Guide 19
Alternatively, you can install the luminaires, and then install the Segment
Controller. However, this document does not describe details for this alternate
installation scenario.
START
Install SLB
Install a Street Light
Bridge module on a
previously installed
luminaire; install another
Street Light Bridge within
line of sight of the first
NO
YES
1
2
3
All
Lamps Off?
Install Luminaires
Install luminaires
Each lamp turns on
Install i.LON
i.LON Segment
Controller discovers as
many lamps as it can,
and turns each one off to
indicate that
communications are
established
DONE
Install i.LON
i.LON Segment
Controller is in
Acquisition Mode to
discover luminaires and
SLB modules
Install Luminaires
Install luminaires
i.LON Segment
Controller discovers
lamps and turns each off
OR
Figure 3. Basic Street Lighting Installation Process