User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
Street Light Bridge Integrator’s Guide 49
2. Enter the following device properties: the name of the device (for
example, “Oak Creek Road Lamp 46N”), the location of the device (select
External), and the XIF file for the device (for example, “slb-normal”).
3. Click OK to add the device. It is added to the tree of its parent channel.
4. Click Submit on the main SmartServer page to accept the change to the
network.
5. Repeat steps 1–4 for each device on the network to be installed.
Entering Device Locations and Neuron IDs
Use the SmartServer Web pages to enter the locations and Neuron IDs of the
devices being installed:
1. Select the device from the LON device tree to display the device page.
2. From the Setup tab, specify the 12-digit hex string comprising the
device’s Neuron ID in the Neuron ID field.
3. You should also enter a description of the device location such as a light
pole number or GPS coordinates that can be associated with the device in
the Geographical Position field.
4. Click Submit. The SmartServer discovers the repeating path for the
device and commissions it.
5. Repeat steps 1–5 for each device on the network to be installed.
Selecting Devices
After entering the locations and Neuron IDs of the devices to be installed, you
select those devices on the tree: