User's Manual
Table Of Contents
- Welcome
- Audience
- Related Documentation
- FCC Compliance
- RF Statements
- Introduction
- Installation for the Street Lighting Solution
- Setting Up the Segment Controller
- Planning for the Street Lighting Solution
- Managing a Street Lighting Network
- Controlling a Street Lighting Network
- Interoperable Interface for the Street Light Bridge
- Cryptography License
- Glossary
60 Managing a Street Lighting Network
model number, or the device and the application image
file (.apb extension) on the SmartServer (to be
downloaded to the device) having mismatching program
IDs.
• Message Error. The SmartServer cannot communicate
with the device after the calculated number of retries
(this state is classified as a hard message error). The
SmartServer regularly attempts to communicate with
the device over an approximate 5-minute period. If the
device does not respond during this time, its Online
Status is changed from “Down” to “Confirmed Down”.
Online Status
Indicates the current device state. The values that can appear
in this field and their colors depend on whether the device has
successfully been installed (black), the device is being installed
(orange), or the device is not running because of an error (red).
Black (Installed)
• Up. The device has been commissioned, it is
communicating with the SmartServer, and it does not
have any hard message failures.
Orange (Installation in Progress)
• Nul. The SmartServer has not yet communicated with
the device.
Red (Error)
• Down. The SmartServer cannot communicate with the
device after the calculated number of retries. This error
is called a hard message error.
• Confirmed Down. After the device has had a hard
message error and is marked as “Down”, the
SmartServer attempts to communicate with the device
using degraded messages (no retries) over an
approximate 5-minute period. If the SmartServer fails
to communicate with the device during this period, the
device is marked as “Confirmed Down”. In addition, the
data points on the device are marked offline in the tree.
• No Agent. No proxy can communicate with the device.
• Invalid Neuron State. The SmartServer has determined
that the device is applicationless.
Communication
Attempts
The number of times that a device (either the SmartServer or a
proxy agent) has attempted to communicate with the target
device.
For direct communication target devices, this field lists the
number of communication attempts made by the SmartServer.
For all other target devices, this field lists the number of
communication attempts made by a proxy agent.