x7722271404 / x772000164 99944200465 Bed Redefiner Attachment Models Used On: PAS-280 Operator’s Manual Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual. It must be read and understood for proper and safe operation. Failure to do so could result in serious injury.
TABLE OF CONTENTS 99944200465 TABLE OF CONTENTS Table of Contents .............................................................................................................................. 2 Introduction ........................................................................................................................................ 3 The Operator’s Manual ................................................................................................................ 3 The Safety Manual.........
99944200465 INTRODUCTION INTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operating tips and SAFETY messages. The Operator’s Manual Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage and assembly specific to this product.
SAFETY Additional or Replacement Manuals Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information. 99944200465 For more information scan this QR code. Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.
99944200465 SAFETY International Symbols Symbol Description Symbol Description Symbol Description Symbol Description Warning, See Operator’s Manual Safety/Alert DO NOT USE BLADES - Line Head Only Thrown objects Wear eye, ear and head protection Finger Severing Plan retreat pathfromfalling objects Hot Surface Wear hand and foot protection Rotating Cutting Attachment AVOID KICKOUT. Keep bystanders at least 15 meters (50 feet) away.
SAFETY 99944200465 Hand Protection Wear sturdy, no-slip, rubber work gloves to improve your grip on the handles. Gloves also provide protection against cuts and scratches, cold environments, and reduce the transmission of machine vibration to your hands. Hearing/Ear Protection ECHO recommends wearing hearing protection whenever unit is used.
99944200465 SAFETY It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.
SAFETY 99944200465 Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manuals • Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation. Clear the Work Area • Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
9944200465 DESCRIPTION DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information. 3 Shaft Decals 2 1 4 1. BLADE - Rotates to provide cutting action. 2. DEBRIS SHIELD/FLAP - Mounted over the cutting attachment.
CONTENTS 99944200465 CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
99944200465 ASSEMBLY ASSEMBLY Power Head Shaft/Lower Shaft Assembly For more information scan this QR code. Do not perform maintenance or assembly procedures with engine running. Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling 1. Set Power Head/Shaft Assembly on a level surface. B 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-out position. D 3. Remove vinyl cap from attachment drive shaft. 4. Remove cardboard spacer, if necessary. 5.
ASSEMBLY 99944200465 Edger Blade Installation 1. Remove bed redefining blade as shown in “Blade Replacement” Section. Discard used split pin. 2. Do not remove inner blade adapter (A) or locking tool (B). 3. Install and center edger blade (C) on inner adapter. A 4. Install outer adapter (D) and nut (E). 5. Tighten nut (E) firmly, counterclockwise. B 6. Remove locking tool (B). 7. Install new split pin (F) to secure nut (E). F C E 12 D X7702096504 © 3/2015 ECHO Inc.
99944200465 OPERATION OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Operation Techniques Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas.
OPERATION 99944200465 5. When starting to work, run the engine at full throttle, and lower the blade gently into the ground. Travel around perimeter of bed, allowing the Redefiner to improve bed's edge. 6. Do not force the blade. Move only as quickly as conditions will allow. If performance suffers or engine RPM drops, reduce walking speed or decrease blade depth and allow engine RPM to return to normal before continuing.
99944200465 OPERATION 3. Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass. Never adjust blade height or clear debris from shield with engine running, otherwise serious personal injury may result. Note: Blade depth may have to be adjusted due to differences in height between the hard surface and the top of the grass. 4.
MAINTENANCE 99944200465 MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.
99944200465 MAINTENANCE 1. Loosen two (2) screws (A) and remove center locating screw (B). Pull gear box and shield from drive shaft housing. A 2. Pull flexible cable from the drive shaft housing, wipe clean and re-coat with a thin coating [15 ml (1/2 oz.)] of grease. 3. Slide the flexible cable back in the drive housing. DO NOT get dirt on the flex cable. B 4. Install the gear housing and shield assembly. 5. Tighten screws securely. Blade Replacement/Lubrication Level 1.
MAINTENANCE 99944200465 6. Remove plug (G) and check level of grease. Grease should fill gear case to bottom of grease plug hole. 7. Add grease if necessary using squeeze-type tube. Do not use high pressure grease gun. DO NOT over-fill. 8. Install inner blade adapter (B) onto PTO shaft (C). G 9. Install and center new blade (F) onto inner fixing plate (B), with longest side toward shield. 10. Install outer fixing plate (E) and nut (D). Tighten left hand threaded nut (D) firmly, counterclockwise.
99944200465 STORAGE STORAGE Storage Hook Installation 1. Insert small end of hook into locating hole on attachment shaft. 2. Slide plastic cap onto end of attachment shaft. X7702096504 © 3/2015 ECHO Inc.
SPECIFICATIONS 99944200465 SPECIFICATIONS MODEL 99944200465 Shaft Length 884.2 mm (34.81 in.) Attachment Width 198.9 mm (7.83 in.) Attachment Height 349.3 mm (13.75 in.) Weight w/blade 3.86 kg (8.52 lb.) Drive Shaft Type 6.35 mm (1/4 in.) Flex Shaft Rotation Direction Clockwise; viewed from right side Blade Length 203.2 mm (8 in.) Gear Case Ratio 2.07 : 1.0 Reduction Shield Open, anti-clog 20 X7702096504 © 3/2015 ECHO Inc.
99944200465 WARRANTY STATEMENTS WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship.
WARRANTY STATEMENTS 99944200465 ECHO does not offer an over the counter exchange program. Any ECHO product re-built other than by ECHO or sold through an unauthorized dealer, or an unauthorized outlet store, is sold without ECHO’s limited warranty coverage. The ECHO Limited Warranty coverage is extended to the original purchaser only, and is not transferable except for emission related parts.
99944200465 PRODUCT REGISTRATION PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
NOTES 99944200465 NOTES 24 X7702096504 © 3/2015 ECHO Inc.
99944200465 X7702096504 © 3/2015 ECHO Inc.
NOTES 26 99944200465 X7702096504 © 3/2015 ECHO Inc.
99944200465 X7702096504 © 3/2015 ECHO Inc.
ECHO, INCORPORATED 28 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.