Instruction v.5

Instruction Sheet

Instructions

PN 77188-00

Rev.120112

SUBJECT: CRADLE KIT # 77189-00

FITS MODELS: LS21, LS22 & LS27

INSTALLATION:

Refer to parts list on reverse.

1. Slide cradle 77187-12 into position on the beam using the slots in the mounting

flanges of the cradle.

2. Slide cradle 77214-12 into position on the beam using the slots in the mounting

flanges of the cradle.

3. Secure the cradles to the frame of the machine and to each other at the cradle

flange locations with the supplied 3/8" inch bolts, washers and nuts, and tighten

securely.

Before inspecting or servicing any part of this machine,

shut off power source, disconnect the battery cables,

and make sure all moving parts have come to a

complete stop.

WARNING

Item 4; 77187-12 Cradle

Installed on engine side of machine

Item 5; 77214-12 Cradle

Installed on operator side of machine

PAGE 1
Instructions WARNING SUBJECT: CRADLE KIT # 77189-00 Before inspecting or servicing any part of this machine, shut off power source, disconnect the battery cables, and make sure all moving parts have come to a complete stop. FITS MODELS: LS21, LS22 & LS27 INSTALLATION: Refer to parts list on reverse. 1. Slide cradle 77187-12 into position on the beam using the slots in the mounting flanges of the cradle. 2.
PAGE 2
NOTICE Cradle Kit 77189-00 cannot be used in conjunction with Engine Guard Kit 77558-00. For log splitters serial number D00001 and above, it is necessary to remove the existing engine guard plate before installing Cradle Kit 77189-00. The Cradle Kit replaces the need of the engine guard plate. CRADLE KIT, PN 77189-00 ITEM PART NO. DESCRIPTION QTY.