Operator's Manual

OPERATION PB-2520

24 X7501190003

Recoil starter: Use short pulls - only 1/2 to 2/3 of rope for starting. Do

not allow the rope to snap back in. Always hold the unit firmly.

Note: If engine does not start after 5 pulls, use Cold Start

Procedure.

Stopping Engine

1. Throttle Trigger/Throttle

Position Lever

Release throttle trigger (G).

Move throttle position lever (B)

forward to idle position and allow

engine to return to idle before

shutting off engine.

2. Stop Switch

Move stop switch (A) to STOP

position.

If engine does not stop when stop switch is moved to STOP

position, close choke - COLD START position - to stall engine.

Have your dealer repair stop switch before using unit again.

Operating Blower

Always wear safety glasses, hearing protection and a face filter

mask or serious personal injury may result. Do not point the

blower pipe in the direction of people or pets.