Installation guide

114548 Page 17
equipment in a typical residential installation. Except for the
cable(s) provided with the device, you are required to use
shielded cables and cords such as coaxial and communication
cables to maintain FCC compliance.
The DishPro Quad LNBF does use radio frequencies during
operation. If you do not install or use the DishPro Quad
LNBF properly, radio energy may be generated that can
interfere with radio communications. Also, it is possible that
radio interference can occur even in a proper installation. The
typical symptom of radio interference is distortion of
television or radio reception. You can determine if the
DishPro Quad LNBF is the cause by confirming that the
interference stops if you unplug the DishPro Quad LNBF
from the receiver, and the interference returns when you plug
the receiver back into the outlet.
The customer may perform minor adjustments such as the
following, in case of problems with the equipment.
• Move or realign the antenna or receiving device, such as
your broadcast TV antenna.
• Increase the distance between the DishPro Quad LNBF and
the equipment with the interference.
If none of the remedies on the previous page stops the radio
interference, you should contact a licensed radio/television
114548_DP_Quad_Instructions.fm Page 17 Friday, May 31, 2002 1:35 PM