Installation guide

Page 20 114548
Trouble-shooting Tables
What is
Happening
Possible
Reason
What to Do
• When you run
Check Switch,
you do not see
“DP Quad”
identified as a
device or LNBF.
Instead, all you
see are Xs.
•TheDishPro
QuadLNBFmay
not be properly
connected.
• The cables may
be longer than
200’.
• The cables may
not be rated for
2150 MHz.
•Youmayhavea
DishPro Adapter
installed on a
DishPro
receiver.
• Check all the
connections in
your system and
run Check
Switch again.
•Makesurethe
cable(s) between
the receiver and
DishPro Quad
are not longer
than 200’.
•Makesurethe
cable is rated for
2150 MHz. Run
Check Switch.
• Remove the
DishproAdapter.
Run Check
Switch.
114548_DP_Quad_Instructions.fm Page 20 Friday, May 31, 2002 1:35 PM