Instruction manual


3. In SLEEP mode, the fan will be kept at low speed. Re-press the SLEEP button, the
setting temperature and ventilation speed will return to the pre-selected one.
4. In SLEEP mode, the unit will shut down automatically after running for 12 hours.
5. Please note, the sleep function is not available while the machine is working in fan
mode. Only available in Cooling or Heating mode.
Heating function (This is optional, only for cool & heat model.)
1. When using Heat Pump, the ambient warm air is recycled and use to heat the area
where it is required. The Exhaust Pipe must be fitted firmly to allow the cold air to
be removed outside.
2. Continuous drainage is compulsory while the unit is in heat mode.
Working ambient
temperature range for heating function is 7 to 25
o
C.
Regulating air flow direction
Adjust the air louvres by hand to control the air flow direction.
FIG. 17
- 11 -