Instruction manual


IMPORTANT DIAGNOSIS NOTE
This machine is equipped with diagnosis function. Please contact us if your machine
displays “E1” or “E2” codes.
NOTE:
1. To prolong the compressor's life, after switching off the unit, please wait for a
minimum of 3 minutes before switching on again.
2. The cooling system will switch off if the ambient temperature is lower than the set
temperature. The fan, however, keeps working on the set level. If the ambient
temperature rises above the selected level, the cooling will return to work.
3. The heating will switch off if the ambient temperature is higher than the set
temperature. The fan keeps working on the set level. As the ambient temperature
drops below the selected level, the heating will return to work.
4. This machine is equipped with ANTI-FROST function. While using the heating
function during low temperature, sometimes the heating will stop for a while in order
to melt the frost. As this occurs, just wait for the heating to return to work.
- 12 -
The above warnings will also appear on your
remote control. Note that this control will require 2
AAA size batteries to operate.
FIG.18