Technical data

P
CARE AND MAINTENANCE
P
2. Continuous draining
Water can be automatically emptied into a floor
drain by attaching the unit with a water hose
(t 12mm) (not included).
Remove the rubber plug from the back of the unit and store
it in a safe location.
Insert the water hose into the unit from the drain outlet in the
back of the unit as shown in the right picture. Then lead the
water hose to the floor drain or a suitable drainage facility.
NOTE:
When the continuous drain feature is not
being used, remove the drain hose from the outlet
and attach the rubber plug back to the drain outlet.
Care and cleaning of the dehumidifier
Turn the dehumidifier off and remove the plug
from the wall outlet before cleaning.
1. Clean the Grille and Case
Use water and a mild detergent. Do not use bleach
or abrasives.
Do not splash water directly onto the main unit. Doing
so may cause an electrical shock, cause the insulation
to deteriorate, or cause the unit to rust.
The air intake and outlet grilles get soiled easily, so use
a vacuum attachment or brush to clean.
2. Clean the bucket
Every few weeks, clean the bucket to prevent growth of
mold, mildew and bacteria. Partially fill the bucket with
clean water and add a little mild detergent. Swish it around
in the bucket, empty and rinse.
NOTE: Do not use a dishwasher to clean the bucket.
After clean, the bucket must be in place and securely
seated for the dehumidifier to operate.
emove the
ubber plug
Insert the hose
from the drain
outlet
09
o
p
."'
2
Thinner
0
L
P