Technical data
P
P
CONTROL PANEL ON THE DEHUMIDIFIER
O
Humidity selector
Defrosting indicator light
Bucket full indicator light
O
Power on indicator light
Control Panel
0
U
o
Humidity Selector
•
The humidity level can be set within a
range of 10%RH(Relative Humidity) to
80%RH(Relative Humidity).
•
For drier air, rotate the Selector clockwise for
a lower percent value(%).
•
For damper air, rotate the Selector counter
clockwise for a higher percent value(%).
•
When set the selctor to CONTINUE position,
the dehumidifier will operate continuously for
maximum dehumidification until the tank is full.
•
To turn off the unit, rotate the selector to the
OFF position.
O
Defrosting indicator light
This indicator light illuminates when frost builds up on the
evaporator coils, the compressor will cycle off and the fan
will continue to run until the frost disappears.
@
Power on indicator light
This indicator light illuminates when connect to the power.
And flashes at 5Hz under temperature sensor malfunction.
O
Bucket full indicator light
This indicator light illuminates when the bucket is full. After
empty the bucket and replace in the proper position, this
light turns off.
Other features
Bucket Full Light
Glows when the bucket is ready to be
emptied, or when the bucket is removed
or not replaced in the proper position.
Auto Shut Off
The water level control switch shuts off the
dehumidifier when the bucket is full, or when
the bucket is removed or not replaced in the
proper position. The dehumidifier will be auto
shut off when the setting dehumidity is reached.
Auto Defrost
When frost builds up on the evaporator coils, the
compressor will cycle off and the fan will continue to run
until the frost disappears.
Power Outage
In the case of a power outage or interruption, the unit will
automatically re-start, in the settings last used, after the
power is restored.
0
L
P