User manual

TROUBLESHOOTING

Troubleshooting

2. If performance is inefficient:

Is the unit on a horizontal flat surface? Check and move if necessary.

Check if the filter is dirty and clean it.

B. If the problem persists (for example indicator lights flashing on the panel prevent

operation and indicate the appliance has identified a fault), unplug the unit and

contact the manufacturer.

D. Do not operate the unit if the cable or plug is damaged, but take it to a qualified

technician. Unauthorized repairs may damage the unit or cause injury to persons

and damage to property, and the guarantee is invalidated.

C. Do not attempt to carry out repairs by yourself.

3. If noise is heard:

Check if the filter is dirty and clean it.

Check that air intake and outlet are uncovered.

In case of low ambient temperature and humidity the unit will cut in and out.

Is there any door or window open?

Is steam being generated in the room?

Is the room too big?

Try the laundry mode operation and let it run in this mode for a day.

Is the unit covered?

Is the unit positioned at the required minimum distances away from walls or objects?

(See page 6 Unit Setup)

1. If the unit fails to operate:

Is flashing? Is the tank correctly installed? Check and reposition.

Is the unit plugged in?

Is it switched on?

Is the unit defrosting ( flashing)?

A: Before phoning for service please check the following:

Normal conditions

The compressor is set to continue running for at least three minutes after the unit is switched

off so as to ensure the next use is smooth. Therefore ensure the power is left on during this

time. This action also extends the working life the unit.

NOTE:

In the unlikely event of a problem with your product, please refer in the first instance to:

ECOAIR TECHNICAL SUPPORT

www.ecoair.org/support

Do not try to repair it by yourself, as this could cause an electrical shock and

void your warranty.