Product Manual

5
3.2 LCD Screen
Appears whenever a connected EcoFlow Smart Generator automatically
shuts off after detecting unsafe carbon monoxide levels.
Refer to the EcoFlow app for specific error codes.
After the IOT button has been pressed for 3 seconds, the Wi-Fi icon will
flash to indicate the product is ready for pairing. Connect the product
with the app, either (1) by finding the product on your phone's Wi-Fi
connections or (2) by connecting the product to the internet. If the former,
the icon will keep flashing; if the latter, the icon will not flash.
The ring will fill up while charging. If the product is at 0% charge, the ring
will flash
Battery Level Indicator:
Wi-Fi Status:
Error Code:
Carbon Monoxide Alert:
* See Section 5 for more troubleshooting steps.
Remote Control Indicator
Pairing Indicator
State of Charge
Remaining Charge/
Discharge Time
EV X-Stream Charging Indicator
Remaining Battery Percentage
Wi-Fi Status
Smart home panel
Double Power
Indicator
DC Output
Smart Generator Indicator
Overload Warning
Extra Battery
Indicator
AC Output
USB-A/USB-C
Output
Low Temperature
Warning
High Temperature
Warning
Fan Indicator
Output Power
Battery Failure Warning
Error Code
Carbon Monoxide Alert
Solar Panel Indicator
Input Power