User's Manual

F Series Fetal & Maternal Monitor User Manual Safety Guide

- 2 -

1.2 Features

The following table lists the measurements that F6, F6 Express, F9 and F9 Express support.

Model

Measurement

F6, F9

F6 Express

F9 Express

Single-FHR   

Dual-FHR   

TOCO   

FM   

AFM   

DECG/IUP Opt

Opt

MECG ×  

NIBP ×  

MSpO2 ×  

TEMP ×  

NOTE:  = Standard Opt = Optional × = Not Available

1.3 Instruction for Safe Operation

NOTE:

In this manual, Monitor refers to F6, F6 Express, F9 and F9 Express, and is used

where the information applies to all models.

 The monitor is designed to comply with the international safety requirements IEC/EN

60601-1 for medical electrical equipment. It is class I equipment.

 The monitor operates within specifications at ambient temperatures between +5ºC (+41ºF)

and +40ºC (+104ºF). Ambient temperatures that exceed these limits could affect the

accuracy of the instrument and cause damage to the modules and circuits. Allow at least 2

inches (5 cm) clearance around the instrument for proper air circulation.

 You must check that the equipment, cables and transducers do not have visible evidence of

damage that may affect patient safety or monitoring capability before use. If damage is

evident, replacement is recommended before use.

 The monitor must be serviced only by authorized and qualified personnel. The manufacturer