User's Manual

ManualsBrandsEDAN INSTRUMENTS ManualsElectronicsFetal Telemetry System

141

142

143

144

145

146

147

148

149

150

F Series Fetal & Maternal Monitor User Manual Maintenance and Cleaning

- 136 -

CAUTION

1 Do not use any disinfectant containing additional active ingredients other than those

listed.

2 Follow the manufacturer’s instruction to dilute the solution, or adopt the lowest

possible density.

3 Do not immerse any part of the monitor or any accessory into liquid.

4 After disinfection, no remaining disinfectant is allowed on the surface.

5 Check if the monitor and accessories are in good condition. If any aging or damage is

detected (e.g. the belt loses its elasticity), replace the damage part(s) or contact the

manufacturer for service before reusing them.

6 Please do not light the TOCO transducer with ultraviolet light for a long time.

NOTE:

The manufacturer has no responsibility for the effectiveness of controlling infectious

disease using these chemical agents. Please contact infectious disease experts in your

hospital for details.



13.4 Sterilizing

Do not sterilize the monitor,

the base station or the accessories, unless this is necessary according

to your hospital regulation.

NOTE:

Check if the monitor,

the base station, cables and accessories function well. If any

problem is detected, please contact the manufacturer for service before reusing them.

Checking Item Checking Method

Visual Inspect the monitor, base station and cables etc. for any damage.

Power On Power on the monitor. Does it boot up successfully without errors and enter the

main menu?

Functionality Test After power up, check whether the AC power indicator and battery status

indicator in the bottom left of the screen display as stated in 3.3.1 section.

Performance Please check the US transducer and TOCO transducer according to 7.2.6

Testing US Transducers and 7.5.4 Testing TOCO Transducers. FTS-3 wireless

transducers also can be tested accordingly.

System When the monitor is connected to FTS-3, please check whether the base

station working channel and its battery status indicator in the bottom right of the

screen display as stated in 3.3.1 section.