Corporation Shorty Header Installation Instructions

Catalog #67452, #67453

Page 1 of 2

Brochure #63-67452

Rev. 5/06 - DA/mc

SHORTY HEADER

For 1994-1995 Ford Mustang, Capri, Mark,

5.0L (302 V8) with E.F.I., Auto/Std. Transmission

Catalog #67452, #67453

INSTALLATION INSTRUCTION

Please study these instructions carefully before installing your new

Shorty Header

. If you have any questions, please

contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail

us at Edelbrock@Edelbrock.com. Please fill out and mail your warranty card.

SHORTY HEADER: These components are designed as a system to improve the exhaust efficiency of the Ford 5.0 liter

V8 engine with E.F.I. (Electronic Fuel Injection). These tubular manifolds are a direct replacement for the factory exhaust

manifolds. A performance gain can be expected by the installation of the system. This system requires no welding

for installation and retains all O.E.M. emissions equipment.

Suggested Tools Needed for Installation: This vehicle has some metric fasteners.

❑ 3/8” ratchet socket set with extensions and sockets

❑ Combination set of open-end wrenches

❑ Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑ Liquid penetrant, anti-seize compound

SPECIAL NOTICE: This Edelbrock Shorty Header has received an Executive Order number (E.O.#) from the California Air

Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission equipment

certification, we have included a silver fan shroud decal to help testing personnel verify the this part is a legal replacement

on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing emission and

engine specifications decal. Do not cover any part of your original emission decal.

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock

Shorty Header. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the

system.

CAUTION: Due to higher underhood temperatures generated by shorty header, vehicles equipped with original spark plug

wires should have them replaced with high temperature plug wires for longer life.

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

PAGE 1
® SHORTY HEADER For 1994-1995 Ford Mustang, Capri, Mark, 5.0L (302 V8) with E.F.I., Auto/Std. Transmission Catalog #67452, #67453 INSTALLATION INSTRUCTION Please study these instructions carefully before installing your new Shorty Header. If you have any questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at Edelbrock@Edelbrock.com. Please fill out and mail your warranty card.
PAGE 2
KIT CONTENTS Catalog #67452 (Ceramic-Coated), #67453 (Ti-Tech Coated) Qty. ❑1 ❑1 ❑1 ❑1 ❑1 ❑1 ❑1 ❑1 ❑ 20 Description Manifold left side #25-9269 (#67452) Manifold right side #25-9270 (#67452) Manifold left side #25-9036 (#67453) Manifold right side #25-9141 (#67453) Manifold left side (B section) #25-9103 Manifold right side (B section) #25-9104 Cat. adapter left (3”) #25-9622 Cat. adapter right (3”) #25-9623 Header bolts; 5/16”-18 x 1” Qty.