Manualshelf

Automobile Parts Specification Sheet

ManualsBrandsEdelbrock ManualsAutomobile PartsPerformer 7162
1
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift: Intake 300° Exhaust 306°
Duration at .050" Lift: Intake 240° Exhaust 246°
Lift at cam: Intake .330" Exhaust .337"
Lift at valve: Intake .560" Exhaust .573"
Timing at .050 Lift: Open Close
Intake 10° BTDC 50° ABDC
Exhaust 57° BBDC 9° ATDC
Centerlines: Intake: 110°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift: Intake 300° Exhaust 306°
Duration at .050" Lift: Intake 240° Exhaust 246°
Lift at cam: Intake .330" Exhaust .337"
Lift at valve: Intake .560" Exhaust .573"
Timing at .050 Lift: Open Close
Intake 10° BTDC 50° ABDC
Exhaust 57° BBDC 9° ATDC
Centerlines: Intake: 110°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift: Intake 300° Exhaust 306°
Duration at .050" Lift: Intake 240° Exhaust 246°
Lift at cam: Intake .330" Exhaust .337"
Lift at valve: Intake .560" Exhaust .573"
Timing at .050 Lift: Open Close
Intake 10° BTDC 50° ABDC
Exhaust 57° BBDC 9° ATDC
Centerlines: Intake: 110°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7162
ENGINE: Chevrolet 396-454 c.i.d. V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5762. Use stock ratio
rocker arms only.
Duration at .006" Lift: Intake 300° Exhaust 306°
Duration at .050" Lift: Intake 240° Exhaust 246°
Lift at cam: Intake .330" Exhaust .337"
Lift at valve: Intake .560" Exhaust .573"
Timing at .050 Lift: Open Close
Intake 10° BTDC 50° ABDC
Exhaust 57° BBDC 9° ATDC
Centerlines: Intake: 110°
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7810 or Accu-Drive gear drive #7891. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2006 Edelbrock Corporation
Brochure #63-0486
Catalog #7162
Rev. 1/06

Summary of content (1 pages)