Instructions / Assembly
WHAT YOU’LL NEED
• Wood Block
• Hammer
• Knee Pads
• Gloves
• Safety Glasses
STEP 1
Use an edger or shovel to help loosen the soil and
dene the path where edging will be installed.
STEP 2
Position the edging with the teeth down along the
dened path.
STEP 3
Place wood block over the spine of the edging and
drive down with a hammer.
STEP 4
Place edging end to end unless overlapping to
shorten length. Separate clamp on top of the piec-
es and drive down to secure clamp.
1 2
3 4
TIPS
• Wetting the ground can make
installation easier in hard soils.
• Position block with grain across the
edging. This will minimize cracking
while hammering.
• Alternating strikes on both ends will
encourage even installation.
• When making sharp bends, place
a block across the
edging at the valley
of the teeth for easy
bends.
• Instead of cutting,
edging can be
overlapped to achieve
desired length.
SCAN FOR
INSTALLATION VIDEO