User guide

OPERATING INSTRUCTIONS
24
USER GUIDE
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
back to normal levels. In order
to help you know the status of
DPF Regeneration, the device
will display an “R” in the “Alert
Indicator” section of the screen
anytime active regeneration is
happening.
TRANSMISSION RELEARN
Read through the screen infor-
mation on your device to under-
stand how this feature works.
NOTE: This feature is avail-
able for the following only:
Evolutions: All 2001-2013 GM
Diesel trucks.
Attitudes: 2001-2005 GM
Diesel trucks.
PERFORMANCE TESTS
Performance tests can be help-
ful for measuring performance
gains after vehicle modifi cations
have been installed (intake,
exhaust, programers, etc). Use
this menu to access 0-60 and
Quarter mile tests. (Figure 9)
Figure 9
WARNING: Do not use
the Performance Tests feature
to break any traffi c laws.
The CS and CTS devices allow
you to test the performance of
your vehicle by timing 0-60 and
quarter mile runs. (Instructions
are provided in the Instructions
menu).The results recorded by
the Performance Test features,
will likely differ from what
you’ll see on a drag-strip or
other racing venues. Incorrect
speedometer calibration, data
sample rate, and tire slippage
can cause miscalculations in the
displayed results.
0-60 TEST
Select the 0-60 menu item and
the following screen will ap-
pear. (Figure 10)
Figure 10
After bringing the vehicle to a
stop, follow the directions noted
on the screen.