User guide

OPERATING INSTRUCTIONS
35
USER GUIDE
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
NOTE: Dodge 07-09 trucks
can be turned off using the
key’s panic button. Dodge
2010 trucks - lock and panic
buttons at the same time.
WARNING: Do not use
this feature in an enclosed
area.
NOTE: The turbo timer will
not function while the vehicle
is regenerating (Diesel).
UNITS
Changing the unit option al-
lows you to view PIDs in either
Metric or English on the main
gauge screen. Vehicle Speed,
for example, may be viewed as
either MPH or KPH. Tempera-
ture PIDs such as Engine Cool-
ant Temperature may be viewed
as either Fahrenheit or Celsius.
CAUTION: If you set up your
units in either English or Met-
ric, the alert value will be the
same for both. If you change
from one unit to another, you
will need to setup the alert val-
ues accordingly. For example,
100 MPH is not the same as
100 KPH.
FACTORY RESET
If you would like to revert back
to the factory default settings,
simply select Factory Reset
and choose YES or press
ENTER.
Many settings will be returned
back to the default setting as
they were when the unit was
new. Any changes you’ve made
to the alerts, the gauge screen
displays, etc will be returned to
the default settings provided by
Edge Products.
NOTE: Factory Reset will not
return the vehicle to stock from
a programmed Power Level.
See Programming Power Lev-
els section for instructions to
return to stock power level.
HELP MENU
The Help Menu contains useful
information about your device,
and the vehicle it is being used
on. It also contains Edge Prod-
ucts Contact Information, and
Technical Support tools. (Figure
23)
Figure 23