User guide

OPERATING INSTRUCTIONS
42
USER GUIDE
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TRANSMISSION SETTINGS
These settings will allow you to
de-fuel during shift and torque
converter lock.
NOTE: We recommend choos-
ing de-fueling (Yes) during
torque converter or clutch slip
for stock transmissions. Se-
lecting (No) prevents the Juice
module from de-fueling when
the torque converter or clutch
is slipping.
CAUTION: Selecting (No)
will allow the Juice to fuel
when the transmission slips.
(Yes) eases the transmission
strain because the Juice low-
ers its power output when the
torque converter or clutch is
slipping.
TRANS SLIP PROTECTION
In some cases, this option
will be available under the
“TRANSMISSION SET-
TINGS” section. Refer to the
previous section for more info.
TIMING OPTIONS
This option is only available
on some Dodge diesel trucks.
Choosing the Juice Timing al-
lows the timing to be matched
to the Juice Power options.
Choosing stock timing will al-
low the engine to run according
to stock settings.
AXLE RATIO
This option is only available on
Dodge diesel trucks. Follow all
on screen instructions
HOT UNLOCKER
This optional power level is a
high performance level, that
should only be used when the
vehicle power and drive-train
have been upgraded. To unlock
the power level, you will need
to:
1. Visit www.edgeproducts.com
2. Click the “Hot Unlock Form”
tab and save a copy to your
computer.
3. Print out the form and fi ll out
accordingly.
4. Follow instructions provided
on the printout.
PROGRAMMING
Depending on your make and
model, your Attitude may give
you the option to program your
PCM. If this is the case, refer
to the Evolution section of this
manual for more information on
programming. Your CS/CTS
will also guide you through the
process.