User guide

INTERNET UPDATES
48
USER GUIDE
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
Fusion Software allows the
user to update their device to
the latest version of fi rmware
and calibration fi les. It can be
downloaded for free from Edge
Products web site at:
www.edgeproducts.com.
NOTE: Be sure to install
both the SOFTWARE and the
DRIVERS that come included
in the download before you
connect your device to your
PC. During the installation
you will be prompted to install
the drivers, choose yes.
For step by step installation in-
structions please copy this link
into your web browser:
http://www.edgeproducts.com/
product_images/product_up-
date-fi le-11.pdf
USING THE SOFTWARE
NOTE: The CS/CTS device
should not be plugged into the
vehicle’s OBDII port and your
computer’s USB port at the
same time. Only the USB is
needed to update.
1. Click the Fusion icon on your
PC desktop once you’ve in-
stalled Fusion.
2. If you have not yet created
an account, click on “Create a
New User”. You will then be
directed to a web page to create
your login information.
NOTE: After entering your
information, a password will be
sent to the e-mail address you
provide. Be sure your e-mail
account doesn’t block e-mails
from www.fusionupdate.com.
3. Upon receiving the password,
enter your e-mail address and
password on the login screen of
the Fusion Software.
4. You’ll be prompted to con-
nect the device to launch. After
connecting the device, you’ll
see a screen pop-up.(Figure 37)
5. Click yes to continue with the
update.
NOTE: Be sure to return your
vehicle to stock before connect-
ing the device to Fusion.
NOTE: Plug USB connector
into the computer before con-
necting the device to ensure
proper operation.
***REQUIRES INTERNET CONNECTION***
F U S I O N U P D A T E
FUSION UPDATE
S O F T W A R E
SOFTWARE