Use and Care Guide

Step 4: If desired, secure the security bracket to the window frame. When installed properly, the

bracket will prevent the window sash from being opened.

Installation in a Sliding Sash Window

Step 1: Cut the foam seal to the proper length and attach it to the window sill, and window frame

as shown in the image to the left. Your window kit includes four (4) adhesive backed foam strips for

this step, two that are short and two that are longer.

Step 2: Attach the window slider kit to the window sill. Adjust the length of the window slider kit

according to the width of the window. Use the winder slider “bolt” to secure the slider to the

correct width. Open the window sash and place the window slider kit on the window sill then

close the window sash securely against window slider kit.

Note: If desired, you may choose to attach the adhesive foam seal to the window slider kit instead

of the window sill and frame.

Note: If needed, you may trim the adjustable window kit if the width of the window is less than

.”