Use and Care Guide

8
Step 2: Place the Unit in the Installation Location
Roll the unit towards the location where the window kit has been installed. Please ensure that the
unit is at least 12 inches from the wall to ensure proper ventilation.
Step 3: Connect the Exhaust Hose to the unit
Align the hooks on the Hose Adapter (c) to the Exhaust Air Outlet on the back of the unit. Slide the
hose downward and into place.
Step 4: Connect the Exhaust Hose to the Window Kit
Push the Window Exhaust Adapter which has been attached to the Exhaust Hose through the
window kit hole and rotate until it is secure.
After you have installed the exhaust hose and window kit, you can plug in your portable air
conditioner and power it on.