Use and Care Guide

11
Control Panel Overview
SWING
Use to stop or start louver movement. If held down for more than two
(2) seconds, the louver auto swing feature is activated.
TIMER
This button is used to initiate the AUTO ON start time and AUTO OFF
stop time program, in conjunction with the - and + buttons.
MODE
This button selects the appropriate operating mode in the following
sequence Auto, Cool, Dry and Fan.
Decrease (-) / Increase (+)
Use to adjust Temperature settings or the Timer setting. Press and
hold both buttons for three (3) seconds to switch between ºC or ºF.
LED Display
When in DRY and FAN modes, this display shows the room
temperature. In other modes, the display shows the set temperature
in °C or °F. It will also display any error codes or alerts (see Error
Codes section.)
FAN
Press this button to select the fan speed from the following setting
choices: LOW, MID, HIGH, and AUTO. The fan speed indicator will
illuminate the fan speed that has been selected.
SLEEP
This button initiates the Sleep feature.
Power
This button powers the unit on and off.