Use and Care Guide

3
Window Kit and Exhaust Hose Installation Instructions
Preparations for Installing the Window Kit
You must vent your portable air conditioner when running it in cooling mode. Your unit includes a
window exhaust kit that can be used to vent the unit out of a window.
Before you begin, make sure that you have all the parts necessary for installation and that a
location is picked.
Window Kit Parts list:
Exhaust Hose
Hose Adapter A
Window Kit Adapter
B
Adjustable Window
Slider Kit (with bolt)
Foam Seal
(Adhesive)
- two (2) short pieces
- two (2) long pieces
Foam Seal
(Non-Adhesive)
- one (1) long piece
Remote Control with
Batteries
Security Bracket with
two (2) screws
Drain Hose
If you have multiple windows, choose one that is near an electrical outlet that will be able to provide
sufficient power to your unit. See the power requirements listed on the product label printed on the
side, or on the back of your portable air conditioner.
Your window kit can be installed in a horizontal or vertical sliding window as shown in the following
images and instructions. Follow the instructions for your desired window kit installation.
Note: You may need to contact your electrician if your room’s circuit is not able to power your
unit.