Built-In Kegerator BR7001SS / BR7001SSOD BR7001BL Refrigerators for the KC7000 Series of Kegerators Owner’s Manual For more information on other great EdgeStar products on the web, go to https://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the EdgeStar kegerator and/or injury to the user. This kegerator is designed for domestic use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
General Safety To prevent back and other types of injuries, use at least two people to move and install the kegerator. This unit is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents IMPORTANT SAFETY INFORMATION……………………………………………………………………………………... I TABLE OF CONTENTS……………………………………………………………………………………………………….. 3 INTRODUCTION……………………………………………………………………………………………………………….. 4 PARTS IDENTIFICATION…………………………………………………………………………………………………….. 5 FRONT VIEW……………………………………………………………………………………………………………………… 5 BACK VIEW……………………………………………………………………………………………………………………….. 5 ACCESSORIES………………………………………………………………………………………………………………… 6 STANDARD ACCESSORIES……………………………………………………………………………………………………….
First Time Operating Instructions Before use, make sure all packaging labels and materials are all removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you are ever to move or ship the appliance in the future. Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Parts Identification Tip: Gather the model and serial number from the product label and write them down before installing the kegerator.
Accessories Your kegerator will come with a set of standard accessories. These include a drip tray, guard rail, guard rail installation pegs, door handle, casters, and dispense tower screws. The other equipment / accessories you receive for the dispense kit and CO2 tank will be based upon the type of kegerator you purchased.
kegerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before you plug the kegerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle. Unpacking the Kegerator Warning: Use two or more people to move and install the kegerator. Failure to do so can result in back or other injury.
Recommended Grounding Method For your personal safety, this appliance must be grounded. It is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged wall socket, and grounded in accordance with the National Electrical Code and local codes and ordinances.
Caution: Do not over-tighten the screws as this may cause damage to the handle or to the stainless steel door. Installing the Casters This unit comes with four (4) casters. These are an optional accessary to assemble if you would like to make the unit more mobile. To install the casters: 1. Remove the four leveling legs from the bottom of the unit. 2. Separate the front casters and back casters. The front casters have a lever for a brake lock. 3.
2. Carefully slide the bottom of the door forward and down, and place it on a padded surface to prevent damaging it. 3. Remove the screws from the upper right hinge. Place the upper right hinge in a safe place in case you need to reverse the door in the future. Remove the plastic caps from the upper left hinge corner. Install the upper left hinge by fastening the screws through the left hinge to the cabinet. Insert the plastic caps into the upper right corner. 4.
Free Standing Installation Note: Please refer to the dispense kit installation guide to complete the full assembly of the kegerator. A free standing installation will allow you to install the kegerator in almost any place you desire. Please follow the safety information referenced on the “Important Safety Information” page in this manual. Guard Rail The guard rail helps to hold glasses on the top of the cabinet in order to avoid spills or broken glass. 1. 2. 3.
Built-in Installation Note: Please refer to the dispense kit installation guide to complete the full assembly of the kegerator. A built-in installation allows the kegerator to be placed under counter. This installation requires several more steps and considerations than a free standing installation. Countertop Opening for Dispense Kit Important Notes: Choose a location that has ambient temperatures above 50°F and below 95°F.
Installation Requirements Once an opening is created in the countertop the next step is to install the cabinet. When installing the kegerator under a counter, follow the recommended spacing dimensions shown below. Make sure the top cover, guard rail, drip tray, and installation pegs are NOT installed on the top of the cabinet. These items will create an obstacle for the cabinet to be installed under counter.
Enclose Space Between Cabinet and Countertop Once the cabinet is installed and the two openings of the cabinet and countertop are aligned, you must seal off the open space that will be created above the kegerator cabinet and under the countertop. If this open space is not properly sealed, the cabinet will lose its cold air and allow warm air to enter.
Keg Loading Half Barrel Keg 5 lb. CO2 tank Double Gauge Regulator Slim Quarter Keg Sixth Barrel Keg 5 lb. CO2 tank Double Gauge Regulator Three Sixth Barrel Kegs 5 lb.
Operation Installation Check List Before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the kegerator? 2. Have the installation instructions been followed, including connecting the machine to electricity? And has proper grounding been installed for the kegerator? 3. Has the machine been leveled? 4.
Normal Sounds Your new kegerator may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor and walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the kegerator can also make noises.
Cleaning and Maintenance Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Exterior Cleaning The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons of baking soda to 1 quart of water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting.
Troubleshooting Continued Symptoms The Kegerator does not turn on. Possible Cause There is a power failure. The unit is not plugged in. A house fuse has blown or the circuit breaker is tripped. The kegerator will not reach the desired temperature. The unit is placed too close to a heat source. The door is opened too frequently or for a long period of time. The kegerator is making strange noises. Certain sounds are normal. The unit is not level or is touching another appliance.
Specifications Note: Technical data and performance information are provided for reference only. Description of product EdgeStar 24” Built-in Kegerator EdgeStar 24” Built-in Indoor/Outdoor Kegerator EdgeStar 24” Built-in Kegerator Model BR7001SS BR7001SSOD BR7001BL Voltage / Frequency AC 115 V~60 Hz AC 115 V~60 Hz AC 115 V~60 Hz Amperage 1.5 A 1.5 A 1.
EdgeStar Limited Warranty WHAT IS COVERED: Full One-Year Parts and Labor This product is warranted by EdgeStar and is subject to any conditions set forth as follows: For a period of ONE (1) YEAR from the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship.
