Use and Care Guide

Important: Before you begin, unplug the kegerator.

Installing the Casters

This unit comes with four (4) casters. These are an optional accessary to assemble if you would

like to make the unit more mobile. To install the casters:

1. Remove the four leveling legs from the bottom of the unit.

2. Separate the front casters and back casters. The front casters have a lever for a brake lock.

3. Place the top plate of the caster over the area of the removed leveling leg and align the

opening to the screw hole openings.

4. Insert the screws to attach the caster to the cabinet.

5. Make sure the screws are tight so the caster is installed firmly.

Reversing the Door Swing

Follow the instructions below to reverse the door swing.

To reverse the door from right swing to left swing:

1. Open the door and, using a Phillips screwdriver, remove the bottom screws from the

lower hinge.

Caution: Do not over-tighten the screws as this may cause damage to the handle or to the

stainless steel door.