Use and Care Guide

10
2. Carefully slide the bottom of the door forward and down, and place it on a padded
surface to prevent damaging it.
3. Remove the screws from the upper right hinge. Place the upper right hinge in a safe
place in case you need to reverse the door in the future. Remove the plastic caps from
the upper left hinge corner. Install the upper left hinge by fastening the screws through
the left hinge to the cabinet. Insert the plastic caps into the upper right corner.
4. Remove the bottom right support bracket. Remove the plastic caps from the bottom left
hinge corner. Insert the plastic caps into the bottom right corner. Install the bottom left
support bracket from the plastic bag that was included with the instruction manual.
5. Carefully insert the door into the upper left corner hinge. Install the lower hinge on the left
corner of the door.
6. Slide the door on top of the lower hinge and secure the door by installing the lower
screws.