Use and Care Guide

19
Troubleshooting Continued
Symptoms Possible Cause Solution
The Kegerator does not turn
on.
There is a power failure. Ensure the unit is plugged in
and the power outlet has
power.
The unit is not plugged in. Plug the unit in to a power
outlet that has sufficient
amperage.
A house fuse has blown or
the circuit breaker is tripped.
Replace the broken fuse in
your fuse box or reset the
breaker.
The kegerator will not reach
the desired temperature.
The unit is placed too close to
a heat source.
Keep the unit away from direct
sun light or other heat
sources.
The door is opened too
frequently or for a long period
of time.
Close the door tightly and do
not open the door too
frequently or for a long period
of time.
The kegerator is making
strange noises.
Certain sounds are normal. Read the “Normal Sounds”
section.
The unit is not level or is
touching another appliance.
Check to make sure that the
kegerator is level, and that it is
not in contact with another
appliance, or furniture.
Frost is forming in the
kegerator.
The space between the top of
the kegerator and bottom of
the countertop is not sealed
properly.
Reference the “Enclose Space
Between Cabinet and
Countertop” section in this
manual.
The environment is humid. Though the unit uses an
“auto-defrost” system, under
certain conditions, manual
defrosting may be required. If
frost builds up, you can try
running the kegerator on a
warmer temperature setting,
minimizing the number of
times you open the door, or
unplugging the unit to allow
the frost to melt.
The ambient temperature is
too low.
The door is being opened too
frequently.
The door will not shut
properly.
Your unit is not level. Make sure the unit is on a
level surface.
The door gasket is dirty. Clean the door gasket.
The door gasket is not
installed correctly.
Make sure the door gasket is
properly installed.