Owner's Manual

12
Reversing the Door Swing
Follow the instructions below to reverse the door swing.
To Reverse the Door from Right Swing to Left Swing
1. Open the door and use a Philips Screwdriver to remove the bottom screws from the
lower hinge.
2. Carefully slide the bottom of the door forward and down, and place it on a padded
surface to prevent damaging it.
3. Remove the screws from the upper right hinge. Place the upper right hinge in a safe
place in case you need to reverse the door in the future. Remove the plastic caps
from the upper left hinge corner. Install the upper left hinge by fastening the screws
through the left hinge to the cabinet. Insert the plastic caps into the upper right corner.
4. Remove the lower hinge and bushing from the bottom right support bracket. Remove
the decorative screws from the left corner of the door and install and tighten them to
the right corner holes. Remove the plastic cap from the top left corner of the door and
insert it into the top right corner.
Important: Before you begin, unplug the refrigerator.